NCG Chemicals Pool One PH Plus + Chemical 4kg

PH PLUS

pH Plus is used to increase the pH level of your pool when it falls below pH 7.2

Features

• Raises PH rapidly
• Prevents erosion or etching of pool surfaces
• Prevents corrosion of metal pool parts such as pump, filters, ladders and etc
• Prevents rapid depletion of chlorine

Instructions

This product is special compound that increases the PH. Test for PH with a reliable test kit. The exact amount of PH Plus will vary when the PH gets too low, below 7.2, PH Plus should be added. 2kg for each 35,000 litres of pool water. Test again in a couple of hours. If the PH is still too low, repeat the same dose. Simple sprinkle on the surface of the water.

Test the pH of the water with a test kit. The ideal pH level required is between 7.2 – 7.6. Add 500g of pH Plus per 100m³ of water in soft water areas. Add 1Kg of pH Plus per 100m³ of water in hard water areas. The quantity required will depend on the total alkalinity and calcium hardness level of the water. Add pH Plus every day until the correct pH is achieved. This may take time to achieve so please allow 12-24 hours for complete mixing.

• Mix the required amount of pH Plus directly into water in a plastic container, always adding chemical to water and not water to chemical. Mix to dissolve if required. Once completely dissolved, add to the pool water.

• Store in a cool dry place. Do not mix with other chemicals. Always wear suitable gloves and eye protection when handling chemicals.

• Contains – Sodium Carbonate
• IF IN EYES – Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• Causes serious eye irritation. Wash hands thoroughly after handling. Avoid breathing dust. Wear protective gloves / protective clothes / eye protection & face protection.

Size:4 KG

• chemical
• NCG Pool One
• ph
• ph plus
• Pool Chemical
• Pool One
• Water